Epson FX-2190II Dot Matrix Printer

Product Models displayed on this website may be available in certain regions only.

 


 

EXPERIENCE RUGGED RELIABILITY AND POWERFUL PERFORMANCE.

Discover a new way to print all business documents with Epson’s FX-2190II dot matrix printers. Designed to deliver absolute performance and reliability, these powerful printers offer blazing print speeds of up to 615cps and an MTBF (Mean Time Before Failure) of up to 25,000 POH (Power On Hours).

  • 9-pin wide carriage
  • Speed: up to 615 cps
  • Prints up to 6-part forms
  • 25,000 power on hours MTBF
  • USB 2.0, Bi-directional Parallel Supported

 

 

Unparalleled Productivity
Boost productivity with fast print speeds of up to 615 cps (10 cpi) and 128 kb memory buffer.

Rugged Reliability
Enjoy cost savings, superior print quality and minimal downtime with a MTBF of up to 25,000 POH.

   

Printing Technology:


Control Panel:
6 switches and 10 LEDs

Print Direction:
Bi-direction with logic seeking

Printing Method:
Impact dot matrix

Number of Pins in Head:
9 pins

Control Code:
ESC/P2, IBM PPDS
 

Reliability:


Printhead Life:
400 million strokes / wire

Mean Print Volume Between Failure (MVBF): 52 million lines (except print head)

Mean Time Between Failure (MTBF):
25,000 Power On Hours (POH) (25% Duty)
 

Print Characteristics:


Bitmap Fonts:
Epson Draft: 10, 12, 15 cpi

Scalable Fonts:
Epson Roman / Epson Sans Serif

Barcode:
EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET
 

 

Paper Media:


Cut Sheet (Single Sheet):
Entry: Front
Length: 100 - 420 mm | (3.9 - 16.5”)
Width: 100 - 420 mm | (3.9 - 16.5”)
Thickness: 0.065 - 0.14 mm | (0.0025 - 0.0055”)
Entry: Rear
Length: 100 - 420 mm | (3.9 - 16.5”)
Width: 100 - 420 mm | (3.9 - 16.5”)
Thickness: 0.065 - 0.14 mm | (0.0025 - 0.0055”)

Cut Sheet (Multi-part Sheet):
Entry: Front
Length: 100 - 420 mm | (3.9 - 16.5”)
Width: 100 - 420 mm | (3.9 - 16.5”)
Thickness: 0.12 - 0.46 mm | (0.0047 - 0.018”)
Entry: Rear
Length: 100 - 420 mm | (3.9 - 16.5”)
Width: 100 - 420 mm | (3.9 - 16.5”)
Thickness: 0.12 - 0.46 mm | (0.0047 - 0.018”)

Continuous Paper (Single Sheet / Multi-part):
Copies:
Original + 4 copies
Entry: Front / Rear / Bottom
Length: 101.6 - 558.8 mm | (4.0 - 22.0”)
Width: 101.6 - 406.4 mm | (4.0 - 16.0”)
Thickness: 0.065 - 0.46 mm | (0.0025 - 0.018”)

Envelope (No.6):
Entry: Rear
Length: 92 mm | (3.6”)
Width: 165 mm | (6.5”)
Thickness: 0.16 - 0.52 mm | (0.0063 - 0.0205”)

Envelope (No.10):
Entry: Rear
Length: 105 mm | (4.1”)
Width: 241 mm | (9.5”)
Thickness: 0.16 - 0.52 mm | (0.0063 - 0.0205”)

Label (Base Sheet):
Entry: Buttom
Length: 101.6 - 558.8 mm | (4.0 - 22.0”)
Width: 101.6 - 406.4 mm | (4.0 - 16.0”)
Thickness: 0.16 - 0.19 mm | (0.0063 - 0.0075”)

Card:
Entry: Front / Rear
Length: 100 - 148 mm | (3.9 - 5.8”)
Width: 100 - 148 mm | (3.9 - 5.8”)
Thickness: 0.22 mm | (0.0087”)

Roll Paper:
Entry: Rear
Diameter: 127mm | (5”)
Width: 216 mm | (8.5”)
Thickness: 0.07 - 0.09 mm | (0.0028 - 0.035”)

Passbook:
Entri: Depan/Belakang
Diameter: 127mm | (5”)
Lebar: 216 mm | (8.5”)
Ketebalan: 0.07 - 0.09 mm | (0.0028 - 0.035”)

Line Spacing:
4.23mm (1/6”) or programmable in increments of 0.059mm (1/432”)
 

General:


Operating Systems:
Printer Driver: Microsoft Windows XP / Vista / 7 / 8 / 10

Utility:
Epson Status Monitor 3: Microsoft Windows XP / Vista / 7 / 8 / 10
Epson Setting Utility: Microsoft Windows XP / Vista / 7 / 8 / 10
 

Consumables:


Ribbon Cartridge Black:
Standard: Fabric Ribbon Cartridge (Black)
Ribbon Life: Approx. 12 million Characters*1
 

 

Environmental Conditions (Operating):


Temperature:
5 - 35 °C*2

Humidty:
10 - 80% RH*2
 

Acoustic Noise:


Acoustic Noise:
55 dB
 

Input Data Buffer:


Input Data Buffer:
128KB
 

 

Interface:


Interface:
USB 2.0, Bi-directional parallel (IEEE-1284 nibble mode supported)
 

Printable Columns:


Pitch:
10cpi: 136 cpl
 
 
 

 

 

Notes:

*1 Actual print yield may vary depending on usage purpose and environment.

*2 Without condensation.