Epson TM-U220

Epson TM-U220 Impact Dot Matrix POS Receipt/Kitchen Printer

Product Models displayed on this website may be available in certain regions only.

 

High Cost-Performance Printers

Outstanding Value Dot Matrix POS Printer

  • 9 pin Serial Impact Dot matrix printing
  • Speed: 4.7lps (40 columns, 16 cpi)
  • Easy operation

 

 

Outstanding Compatibility
The TM-U220 printers are designed to be compatible with existing systems built around a TM-U210. These systems can be upgraded simply by dropping in a TM-U220. Moreover, since the external dimensions are nearly identical, there is no need to change the installation environment. The transition to the new model is as smooth as can be.

Easy Operation
Free busy operators from troublesome roll paper and ribbon cassette replacement. The TM-U220 makes these chores a snap. Simply pop the cover, drop in the paper or ribbon, shut the cover. You're back in business.

Higher Printing Speed
A full 30% faster than its predecessors, the TM-U220 printers provide high-efficiency throughput. Retailers can hand receipts to customers faster. Restaurant kitchens can receive orders quickly.

Superior Versatility
The versatile TM-U220 suits a wide range of needs and applications. Each type is powerful, yet compact enough to fit in confined spaces. The wall-mountable Type B frees up valuable counter space in kitchens and other tight locations. Moreover, both Type B and Type D handle your choice of 58, 69, or 76 mm width roll paper.

Environmentally Conscious
This product meets Epson ecology label compliance standards and has following major features:
- Low energy consumption (25 % lower during operation, 60 % lower during standby than TM-U210).
- Reduced labor for disassemby by reducing the number of parts.
- No use of chemical substances prohibited to be included in products for parts, materials and packing materials.
- Uses high quality plain paper, since it is easier for recycling than thermal paper. Three selectable paper widths avoid wasting paper.

   

Print Font:


Font:
Font A: 9 x 9
Font B: 7 x 9 (default)

Characters Per Inch:
Font A: 13.3cpi
Font B: 16cpi

Column Capacity:
Paper width 76 mm, 33 / 40
69mm, 30/36 columns
58mm, 25/30 columns

Character Size (W x H):
Font A: 1.6mm (W) x 3.1mm(H)
Font B: 1.2mm(W) x 3.1mm(H)

Character Set:
95 Alphanumeric, 48 International, Extended graphics: 128 x 12 pages
 

Paper:


Roll Paper:
76.0 ± 0.5 (W) × dia. 83.0
69.5 ± 0.5 (W) × dia. 83.0
57.5 ± 0.5 (W) × dia. 83.0
 

Standard Accessories:


Standard Accessories:
Dedicated ribbon cassette (ERC-38(B/R))
Roll paper
User’s manual
AC adapter
 

 

Dot Density:


Dot Density:
180 dpi x 180 dpi
 

Overall Dimension (D x W x H):


Overall Dimension (D x W x H):
Type A: 160 (D) x 286 (W) × 157.5 (H) mm
Type B: 160 (D) x 248 (W) × 138.5 (H) mm
Type D: 160 (D) × 248 (W) x 138.5 (H) mm
 

Mass:


Mass:
Type A: Approximately 2.7 kg (5.94 lb)
Type B: Approximately 2.5 kg (5.5 lb)
Type D: Approximately 2.3 kg (5.06 lb)
 

 

Device:


Two Colour Printing:
Yes

Autocutter:
Yes except Type D

Take Up Device:
Yes only Type A

Wall Hanging Install:
Yes except Type A
 

Interface:


Interface:
RS-232C, Bidirectional parallel, Dealer Option: USB, 10 Base-T I/F
 

Reliability:


MCBF:
18 milion lines

Printer Mechanism Life:
7.5 millon lines

Auto Cutter Life:
800,000 cuts (Type A and Type B only)

Mean Time Between Failure (MTBF):
180,000 hours
 

 

Printer Type:


Print Method:
9-pin serial impact dot matrix

Print Speed :
4.7 lps (at 40 columns, 16 cpi), 6.0 lps (at 30 columns, 16 cpi)
 

Power:


Supply Voltage and Frequency:
DC +24 V ± 7%

Power Consumption:
Operating: Approx. 38 W (Mean)
Standby: Approx. 2.2 W (Mean)

Power Supply:
AC adapter
 

Receive Data Buffer:


Receive Data Buffer:
4 KB or 40 bytes